Magnets & Stickers (Paper / Vinyl)
Magnets
PLEASE NOTE NEW SIZES
Size
Various available:86mm x 54mm (Plus 3mm on each side), 164mm x 76mm (Plus 3mm on each side)
Characteristics
Full colour front only with a Gloss Laminate adhered to 4mm magnetic base
Artwork/ Design requirements
Print ready PDF to be supplied via online system. A minimum 3-5mmm bleed is strongly recommended for magnets as the trimming may vary by 1 - 2mm. Please do not put borders around the edges as these may shift when trimming, also it is highly recommended that you keep all essential designs about 3-4mm from the trim edge.
Stickers - Paper
Size
Various:
54mm x 89mm (Plus 3mm on each side)
89mm x 113mm (Plus 3mm on each side)183mm x 113mm (Plus 3mm on each side)89mm x 230mm (Plus 3mm on each side)
Characteristics
Printed on gloss coated 'Crack back' paper
Available in
170 gloss (approx)
Common Uses
All types on indoor sticker applications
Artwork/ Design requirements
Follow standard artwork requirements but be careful not to create designs too close to the edge as there may be a slick movement during trimming of between 1 - 2mm
Stickers - Vinyl
Size
50mm x 90mm (Plus 3mm on each side)
50mm x 210mm (Plus 3mm on each side)
60mm x 297mm (Plus 3mm on each side)
100mm x 100mm (Plus 3mm on each side)
100mm x 210mm (Plus 3mm on each side)
210mm x 297mm (Plus 3mm on each side)
297mm x 420mm (Plus 3mm on each side)
Characteristics
Printed on gloss UV Gloss vinyl
Available in
170 gloss (approx)
Common Uses
All types on indoor and outdoor sticker applications, however severe sunlight may affect the colours over time.
Artwork/ Design requirements
Follow standard artwork requirements but be careful not to create designs too close to the edge as there may be a slight movement during trimming of between 1 - 2mm
PLEASE NOTE: While these stickers are printed on UV resistant vinyl and are UV coated for extra protection, CJ King cannot be held responsible if stickers fade in time due to severe UV or weather conditions.